APO Documents - Modular polyester boxes

  • The range consists of nine types with module 150/185 mm, with dimensions ranging from 185 x 150 mm to 600 x 600 mm in five different designs:
    • with screwed polyester lid
    • with screwed polycarbonate lid
    • with screwed flap lid
    • with hinged polyester lid
    • ventilated with hinged polyester lid and lock.
  • The base is made from self-extinguishing, glass-fiber- reinforced and halogen-free polyester, dyed in mass RAL 7036 (dark grey). The glass-fiber content is a minimum of 20%. The base also comes with a minimum of four M4 threaded inserts for mounting metal, perforated metal and pertinax (insulated) mounting plates, and also mounting frames for modular equipment. The base also has space for four M6 threaded inserts.
  • The lid is manufactured:
    • either from self-extinguishing, glass-fiber reinforced and halogen-free polyester, dyed in mass RAL 7036 (dark grey)
    • or from transparent polycarbonate.
  • The design as flap lid: frame in self-extinguishing, glass-fiber-reinforced and halogen-free polyester, dyed in mass RAL 7036 (dark grey), the window in transparent polycarbonate. -
  • The box can withstand temperatures from -50° to +150°C (peak). (-35° to +120°C for the box with polycarbonate lid).
  • The useful mounting depth of the box can be expanded by means of depth extension frames without affecting the original protection degrees.
  • The box offers maximum protection for user and equipment thanks to the total insulation and the protection degree as per IEC 60529 and also complies with the impact-resistance standard EN 50102. This protection covers the total volume of the enclosure according to EN 50298.
    • box with screwed polyester lid, IP67-IK10
    • box with screwed polycarbonate lid, IP66-IK10
    • box with screwed flap lid, IP67-IK10
    • box with hinged polyester lid, IP55-IK10
    • ventilated box with hinged polyester lid and lock, IP44-IK10.
  • Boxes are suitable for external mounting.
  • Boxes are corrosion-resistant and do not require any maintenance.
  • There are various ways of securing the box to the wall:
    • using screws in the four corner holes
    • using fixing lugs secured through the four corner holes
    • using stainless steel fixing clamps, fitted directly to the rear of the base in the reinforcements provided.

      In all these cases, the IP values and total insulation are guaranteed.
  • All boxes have the same depth and can be assembled by means of coupling frames.
  • Boxes have the UL certification mark, in accordance with UL standard 508 and also comply with the CSA certification mark as per C22.2 no. 94.
    • boxes with polyester lid, types 3, 3R, 4, 4X, 6, 6P, 12 and 13
    • boxes with polycarbonate lid, types 3, 3R, 4, 4X, 12 and 13
    • boxes with flap lid, types 3, 3R, 4, 4X, 6, 12 and 13.
  • Boxes also bear the following certification marks:
    • AS Australian Standards 3131-1991
    • Eexe II. NIEB 88B.102.698 U
    • Lloyd's Register of Shipping
    • KEMA KEUR
    • BASEEFA.