ARIA Documents - Modular polyester boxes

  • Multipurpose polyester cabinets
  • The range consists out of fourteen types with module 250 mm, with dimensions ranging from 500x500 mm up to 1250x1000 mm, in one depth 320 mm and two different designs :
    • cabinet in-factory assembled with plain door
    • cabinet in-factory assembled with glazed door
  • Four stainless steel wall mounting brackets are also supplied.
  • The cabinet is manufactured from self extinguishing, hot molded, glass fiber reinforced and halogen-free polyester, dyed in mass RAL 7035 (light grey). The glass-fiber content is a minimum of 25%.
  • The cabinet exists out of a back panel, two side panels, a top panel, a base panel and a flush mounted door.
  • The door is secured to the main structure of the cabinet by means of hinges, each step of 250mm, and its angle of opening is a maximum of 100°. The hinges are not visible when the door is in closed position.
  • Closure is affected by a five-point locking mechanism (three-point for widths 500 mm) controlled by a single central operating handle.
  • The operating handle is suitable for all types of profile half cylinder locks (standard depth 40 mm, alternative depth 45 mm).
  • A door lifter (for bigger dimensions) ensures the door takes its center position during closing.
  • The standard depth of the cabinet is 320 mm, but can be increased to 640 mm by using a 320 mm extension kit.
  • The cabinets can be coupled in height and in width by means of a coupling kit.
  • The mounting plate (in pertinax, in Sendzimir zinc coated sheet steel or in perforated metal) can be set up and wired outside the cabinet. It is placed subsequently in the cabinet. The mounting plate is secured directly to the securing points provided on the back panel of the cabinet or mounted on four depth adjustment brackets (steps of 12.5 mm).
  • The modular mounting frame for DIN-rail equipment is completed with modular functions height 150 mm, plain or with cut-outs, or modular plain functions height 300 mm. They guarantee a protection degree of IP20 with open doors.
  • The addition of a rainhood allows for natural ventilation (IP44/IP54) in the cabinet.
  • The cabinets are designed for wall mounting, floor standing and pole fixing.
  • The cabinets are resistant to temperatures of -50° up to +150°C (peak).
  • The cabinet offers maximum protection to user and equipment thanks to the total insulation and the high protection degree IP65 (IP55 for cabinets with glazed door) according to IEC 60529, EN 60529. It also complies with the impact-resistance degree IK 10 (IK 07 for cabinets with glazed door) according to EN 50102. This protection covers the total volume, protected space, of the cabinet according to EN 50298.
  • The cabinets are suitable for indoor as well as outdoor use.
  • The cabinets are corrosion-resistant and do not require any maintenance.
  • The cabinets are secured to the wall by means of stainless steel mounting brackets, which are clinged and fixed on the back without using any screws. These wall mounting brackets can be mounted vertical or horizontal. The cabinets with rain hood are secured to the wall by means of four special similar brackets.
  • A cabinet can be placed on the ground by using a floor mounting frame, which is anchored to the ground together with the cabinet. All cabinet's width 750 and 1000 mm can be mounted on a DIN-base by means of a DIN adaptor frame. In all these cases the IP degree as well as the total insulation are guaranteed.
  • The cabinets have following approvals: UL and CSA
  • cabinets with single door: types 3, 3R, 3S, 4, 4X, 12, 12K and 13.
  • cabinets with double door: types 3, 3R, 3S, 4, 4X, 12, 12K and 13.
  • coupled cabinets: types 3, 3R, 3S, 12, 12K and 13.
  • Standards: IEC 60529, EN 60529, EN 50102, EN 50298, IEC 60439-5