Integrated with Contactor, High Interuption Capacity

GE Controls, North American Catalog, IEC Manual Motor Starters

45 mm High Interruption Capacity (Rotary Operator)
Integrated with C2000 Contactor

45 mm High Interruption Capacity (Rotary Operator) Integrated with C2000 Contactor

Open, AC Operated Contactors

High Interruption Capacity

Individual, Group and Combination2 Installations Manual Motor Starter Type GPS1BH

Selection of the starter depends on the actual motor full load current and service factor. For motors with service factor of 1.15 or greater, use motor full load current to select the appropriate current range. For motors with a service factor less than 1.15, multiply the normal full load current by .9 for the current setting. Single phase applications require all three overload legs to be energized for proper operation. Use separate conductor to connect terminal T2 to L3. Connect power to L1 and L2 and apply load between T1 and T3.

55 mm High Interruption Capacity (Rotary Operator)
Integrated with C2000 Contactor

55 mm High Interruption Capacity (Rotary Operator) Integrated with C2000 Contactor

Open, AC Operated Contactors

High Interruption Capacity

Individual, Group and Combination2 Installations Manual Motor Starter Type GPS2BH

 

 

45 mm High Interruption Capacity (Rotary Operator)
Integrated with C2000 Contactor

45 mm High Interruption Capacity (Rotary Operator) Integrated with C2000 Contactor

Open, DC Operated Contactors

High Interruption Capacity

Individual, Group or Combination2 Installation Manual Motor Starter Type GPS1BH

Selection of the starter depends on the actual motor full load current and service factor. For motors with service factor of 1.15 or greater, use motor full load current to select the appropriate current range. For motors with a service factor less than 1.15, multiply the normal full load current by .9 for the current setting. Single phase applications require all three overload legs to be energized for proper operation. Use separate conductor to connect terminal T2 to L3. Connect power to L1 and L2 and apply load between T1 and T3.

55 mm High Interruption Capacity (Rotary Operator)
Integrated with C2000 Contactor

55 mm High Interruption Capacity (Rotary Operator) Integrated with C2000 Contactor

Open, DC Operated Contactors

High Interruption Capacity

Individual, Group or Combination2 Installation Manual Motor Starter Type GPS2BH