Surge Suppressor

Industrial/Machine Tool Relays, CR120B, Accessories

The surge suppressor is designed to absorb energy surges that appear on the line. It mounts directly on the coil terminals. For use on relay coils of 110-120 Volts, AC.

Indicating Light

Industrial/Machine Tool Relays, CR120B, Accessories

An indicating light is provided with mounting bracket and leads. It mounts on any of the standard relays and can be used to monitor the contacts or magnet coil operation.

Mounting Track

Industrial/Machine Tool Relays, CR120B, Accessories

The mounting track gives pre-spaced relay mounting, allowing easy installation of relays side by side with optimum spacing, and is available in either nonbreakaway or breakaway form. The breakaway design allows the desired length to be broken off and attached to the panel. All types of mounting track are 40 inches in length and mount 16 relays.

Manual Operator Tool

Industrial/Machine Tool Relays, CR120B, Accessories

This tool is used on the manual operator to hold relays in the energized position so that panel circuits can be checked.

Overlapping Contact Cartridges

Industrial/Machine Tool Relays, CR120B, Accessories

Overlapping contacts are used in circuits where it is necessary to close one contact before opening another. These are similar to standard contacts except the normally open contact closes early and the normally closed contact opens late. Requires at least two overlapping cartridges per relay.

Low-Energy, Gold-Plated Contact Cartridges

Industrial/Machine Tool Relays, CR120B, Accessories

This cartridge is similar to the basic relay cartridge except it has gold plating on the contact tips, making it ideal for use in low-energy signal electronics applications.