Full Voltage Mini Contactors - Nonreversing

- Contactors are suitable for use on alternating current (ac) control circuits up to 600 volts and dc control circuits up to 240 volts.
- All terminals are dual marked in accordance to EN50012, and U.S. marking standards.
- Contactor may be mounted on 35mm DIN rail EN50022-35, or may be panel-mounted using two #8 screws in diagonal corners.
- Screw and quick-connect terminals are protected against accidental contact in accordance with VDE0106T.100 and VBG4.
- Low-coil wattage requirement makes contactors ideal for most applications. 24 Vdc PLC interface versions are available. (See Special PLC-Compatible Products, page 5-15.)
- A wide range of accessories, including front-mounted auxiliary contact blocks, side-mounted auxiliary contact blocks, timer, and surge suppressors, are easily installed on contactors.

Full Voltage Mini Contactors - PLC Compatible

Three-Pole-Low Coil Wattage Contactors

While the standard line of MC0C dc operated contactors requires only 3 watts coil holding current, some PLC applications require lower wattage coils to efficiently interface with the PLC. Special contactors are available with 24 VDC coils, which only require 1.2 or 2 watts for pull in and holding. These contactors are available with screw terminal configuration.

- All terminals are dual marked in accordance to EN50012, and U.S. marking standards.
- Contactor may be mounted on 35mm DIN rail EN50022-35, or may be panel mounted using two #8 screws in diagonal corners.
- Screw-type terminals are protected against accidental contact in accordance with VDE0106T.100 and VBG4.
- Timer and surge suppressors are easily installed on contactors. A maximum of two auxiliary contacts are permissible on the 2 volt PLC version. Auxiliary contacts may not be utilized on the 1.2 watt version.

Nonreversing, Line Voltage - 600 VAC Maximum, HP Ratings AC-3 Duty

Standard Screw-Type Terminals
Faston (2 x 2.8 mm) Quick Connection Terminals
Faston (1 x 6.3 mm) Quick Connection Terminals
Printed Circuit Board Terminals

Nonreversing, Line Voltage - 600 VAC Maximum, HP Ratings AC-3 Duty

Standard Screw-Type Terminals
Faston (2 x 2.8 mm) Quick Connection Terminals
Faston (1 x 6.3 mm) Quick Connection Terminals
Printed Circuit Board Terminals

Nonreversing, Line Voltage - 600 VAC Maximum, HP Ratings AC-3 Duty

Standard Screw-Type Terminals
Faston (2 x 2.8 mm) Quick Connection Terminals
Faston (1 x 6.3 mm) Quick Connection Terminals
Printed Circuit Board Terminals

Nonreversing, Line Voltage - 600 VAC Maximum, HP Ratings AC-3 Duty

Standard Screw-Type Terminals
Faston (2 x 2.8 mm) Quick Connection Terminals
Faston (1 x 6.3 mm) Quick Connection Terminals
Printed Circuit Board Terminals

Nonreversing, Line Voltage - 600 VAC Maximum, HP Ratings AC-3 Duty

24 VDC PLC Contactors Standard Screw Type Terminals